frameless!
Magnetic License Plate Mount
Aluminium-Plate
Plastic-Plate
Fuck that FRAME OFF!
No frame, no screws, no holes. No matter if plastic bumper, aluminium trunk or steel part, the FRAMEOFF magnetic license plate mount is working with any material!
CLEAN
FAST
Unbeatable quick changing!
The time of fiddling around with number frames is over: With FRAMEOFF, your license plate is changed within seconds.
Strong
Powerful, weatherproof but no scratches!
FRAMEOFF magnets are custom-made products for use on vehicles. They hold your license plate with strong attraction, are saltwater resistant and allow temperatures of more than 100°C.
with frame
FRAMEOFF
CLEAN LOOK
without compromises
FRAMEOFF
no holes
no Velcro
no tinkering
Stay clean with
FRAMEOFF
how does it work?
5 CONTRA-magnets
behind the bumper
5 SOFTCOAT-magnets
on the license plate
(or aluminium-trunk)
total height of
Softcoat-Magnets
=
distance
between license
plate and car
=
4.5mm
fastened?
Material thickness
up to 8mm
holding force
60n = 6KG
for 2.5 mm
Material
Thickness
If a license plate is mounted on plastic, aluminium, glass or any other non-magnetic material, the wall thickness, this means for example the thickness of the bumper at the relevant spot, determines the magnetic attraction. The wall thickness of a plastic bumper is usually 2 to 3 mm. With a thickness of 3 mm, FRAMEOFF magnets are holding the license plate to the vehicle at over 5.5 kg, with a wall thickness of 5 mm at over 3.6 kg and at 8 mm at around 2.1 kg. This is more than strong enough for daily use but not excessive, so the license plate can be easily removed by hand at any time.
If a number plate with FRAMEOFF magnets is directly attached to a steel tailgate or another car part made of steel, no contra magnets are required. The strength of the attraction is here influenced by the thickness of the steel plate itself. The soft-coat magnets are designed in such a way that the license plate will hold well on any sheet, but not excessively strongly..
We recommend mounting the number plate always at right angles to the direction of driving and using all 5 pairs of magnets. It is best to commission one of our installation partners or to follow the instructions exactly. In this way you can be sure that the license plate remains securely in place even at speeds of over 300 km/h.
Variations
Set for 1 License Plate
5 Softcoat-Magnets
5 Contra-Magnets
2 Cleaning Wipes
1 Sheet Sandpaper
Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front or rear bumper.
Set for 2 License Plates
10 Softcoat-Magnets
10 Contra-Magnets
4 Cleaning Wipes
2 Sheets Sandpaper
Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper.
Set for 2 exchangeable License Plates
on 2 different vehicles
10 Softcoat-Magnets
20 Contra-Magnets
6 Cleaning Wipes
2 Sheets Sandpaper
Magnets for 2 license plates and 4 sets of contra magnets to install on the vehicle, for example same front and back license plate to use on 2 different cars. Suitable for the Installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper. The license plate can also be installed on parts made of steel.
Set for 1 License Plate
mounted on magnetic body part
5 Softcoat-Magnets
1 Cleaning Wipe
1 Sheet Sandpaper
Magnets for 1 license plate without contra-magnets for the vehicle. Suitable only for installation on magnetic material, for example trunk lid made of steel, front or rear panel made of steel. Not suitable for the installation on parts made of aluminium.
Set for 1 Plastic License Plate
5 Softcoat-Magnets
5 Contra-Magnets
2 Cleaning Wipes
1 Primer Pen
Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front or rear bumper.
Set for 2 Plastic License Plates
10 Softcoat-Magnets
10 Contra-Magnets
4 Cleaning Wipes
1 Primer Pen
Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper.
Set for 1 Plastic License Plate
mounted on magnetic body part
5 Softcoat-Magnets
1 Cleaning Wipe
1 Primer Pen
Magnets for 1 license plate without contra-magnets for the vehicle. Suitable only for installation on magnetic material, for example trunk lid made of steel, front or rear panel made of steel. Not suitable for the installation on parts made of aluminium.